X-Frame-Options: DENY and frame-ancestors 'none' stop clickjacking
of OIDC, register-confirm, and debug HTML pages. nosniff and no-referrer
are cheap defence-in-depth for the same surfaces.
Updates #3157
Implement tailcfg.PingRequest support so the control server can verify
whether a connected node is still reachable. This is the foundation for
faster offline detection (currently ~16min due to Go HTTP/2 TCP retransmit
behavior) and future C2N communication.
The server sends a PingRequest via MapResponse with a unique callback
URL. The Tailscale client responds with a HEAD request to that URL,
proving connectivity. Round-trip latency is measured.
Wire PingRequest through the Change → Batcher → MapResponse pipeline,
add a ping tracker on State for correlating requests with responses,
add ResolveNode for looking up nodes by ID/IP/hostname, and expose a
/debug/ping page (elem-go form UI) and /machine/ping-response endpoint.
Updates #2902
Updates #2129
Render an interstitial showing device hostname, OS, and machine-key
fingerprint before finalising OIDC registration. The user must POST
to /register/confirm/{auth_id} with a CSRF double-submit cookie.
Removes the TODO at oidc.go:201.
Reflection is a streaming RPC and bypasses the unary auth
interceptor on the remote (TCP) gRPC server. Remove it there;
the unix-socket server retains it for local debugging.
Introduce a structured NodeConfig that replaces the flat
EphemeralNodeInactivityTimeout field with a nested Node section.
Add node.expiry config (default: no expiry) as the unified default key
expiry for all non-tagged nodes regardless of registration method.
Remove oidc.expiry entirely — node.expiry now applies to OIDC nodes
the same as all other registration methods. Using oidc.expiry in the
config is a hard error. determineNodeExpiry() returns nil (no expiry)
unless use_expiry_from_token is enabled, letting state.go apply the
node.expiry default uniformly.
The old ephemeral_node_inactivity_timeout key is preserved for
backwards compatibility.
Updates #1711
Add a new hscontrol/servertest package that provides a test harness
for exercising the full Headscale control protocol in-process, using
Tailscale's controlclient.Direct as the client.
The harness consists of:
- TestServer: wraps a Headscale instance with an httptest.Server
- TestClient: wraps controlclient.Direct with NetworkMap tracking
- TestHarness: orchestrates N clients against a single server
- Assertion helpers for mesh completeness, visibility, and consistency
Export minimal accessor methods on Headscale (HTTPHandler, NoisePublicKey,
GetState, SetServerURL, StartBatcher, StartEphemeralGC) so the servertest
package can construct a working server from outside the hscontrol package.
This enables fast, deterministic tests of connection lifecycle, update
propagation, and network weather scenarios without Docker.
Remove the Batcher interface since there is only one implementation.
Rename LockFreeBatcher to Batcher and merge batcher_lockfree.go into
batcher.go.
Drop type assertions in debug.go now that mapBatcher is a concrete
*mapper.Batcher pointer.
Generalise the registration pipeline to a more general auth pipeline
supporting both node registrations and SSH check auth requests.
Rename RegistrationID to AuthID, unexport AuthRequest fields, and
introduce AuthVerdict to unify the auth finish API.
Add the urlParam generic helper for extracting typed URL parameters
from chi routes, used by the new auth request handler.
Updates #1850
Replace gorilla/mux with go-chi/chi as the HTTP router and add a
custom zerolog-based request logger to replace chi's default
stdlib-based middleware.Logger, consistent with the rest of the
application.
Updates #1850
Errors should not start capitalised and they should not contain the word error
or state that they "failed" as we already know it is an error
Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>
Go style recommends that log messages and error strings should not be
capitalized (unless beginning with proper nouns or acronyms) and should
not end with punctuation.
This change normalizes all zerolog .Msg() and .Msgf() calls to start
with lowercase letters, following Go conventions and making logs more
consistent across the codebase.
This commit replaces the ChangeSet with a simpler bool based
change model that can be directly used in the map builder to
build the appropriate map response based on the change that
has occured. Previously, we fell back to sending full maps
for a lot of changes as that was consider "the safe" thing to
do to ensure no updates were missed.
This was slightly problematic as a node that already has a list
of peers will only do full replacement of the peers if the list
is non-empty, meaning that it was not possible to remove all
nodes (if for example policy changed).
Now we will keep track of last seen nodes, so we can send remove
ids, but also we are much smarter on how we send smaller, partial
maps when needed.
Fixes#2389
Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>
When the node notifier was replaced with batcher, we removed
its closing, but forgot to add the batchers so it was never
stopping node connections and waiting forever.
Fixes#2751
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Initial work on a nodestore which stores all of the nodes
and their relations in memory with relationship for peers
precalculated.
It is a copy-on-write structure, replacing the "snapshot"
when a change to the structure occurs. It is optimised for reads,
and while batches are not fast, they are grouped together
to do less of the expensive peer calculation if there are many
changes rapidly.
Writes will block until commited, while reads are never
blocked.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
this commit moves all of the read and write logic, and all different parts
of headscale that manages some sort of persistent and in memory state into
a separate package.
The goal of this is to clearly define the boundry between parts of the app
which accesses and modifies data, and where it happens. Previously, different
state (routes, policy, db and so on) was used directly, and sometime passed to
functions as pointers.
Now all access has to go through state. In the initial implementation,
most of the same functions exists and have just been moved. In the future
centralising this will allow us to optimise bottle necks with the database
(in memory state) and make the different parts talking to eachother do so
in the same way across headscale components.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Build / build-cross (GOARCH=386 GOOS=linux) (push) Waiting to run
Build / build-cross (GOARCH=amd64 GOOS=darwin) (push) Waiting to run
Build / build-cross (GOARCH=amd64 GOOS=linux) (push) Waiting to run
Build / build-cross (GOARCH=arm GOOS=linux GOARM=5) (push) Waiting to run
Build / build-cross (GOARCH=arm GOOS=linux GOARM=6) (push) Waiting to run
Build / build-cross (GOARCH=arm GOOS=linux GOARM=7) (push) Waiting to run
Build / build-cross (GOARCH=arm64 GOOS=darwin) (push) Waiting to run
Build / build-cross (GOARCH=arm64 GOOS=linux) (push) Waiting to run
Tests / test (push) Waiting to run
* feat: add verify client config for embedded DERP
* refactor: embedded DERP no longer verify clients via HTTP
- register the `headscale://` protocol in `http.DefaultTransport` to intercept network requests
- update configuration to use a single boolean option `verify_clients`
* refactor: use `http.HandlerFunc` for type definition
* refactor: some renaming and restructuring
* chore: some renaming and fix lint
* test: fix TestDERPVerifyEndpoint
- `tailscale debug derp` use random node private key
* test: add verify clients integration test for embedded DERP server
* fix: apply code review suggestions
* chore: merge upstream changes
* fix: apply code review suggestions
---------
Co-authored-by: Kristoffer Dalby <kristoffer@dalby.cc>
* fix issue auto approve route on register bug
This commit fixes an issue where routes where not approved
on a node during registration. This cause the auto approval
to require the node to readvertise the routes.
Fixes#2497Fixes#2485
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* hsic: only set db policy if exist
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* policy: calculate changed based on policy and filter
v1 is a bit simpler than v2, it does not pre calculate the auto approver map
and we cannot tell if it is changed.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
---------
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* utility iterator for ipset
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* split policy -> policy and v1
This commit split out the common policy logic and policy implementation
into separate packages.
policy contains functions that are independent of the policy implementation,
this typically means logic that works on tailcfg types and generic formats.
In addition, it defines the PolicyManager interface which the v1 implements.
v1 is a subpackage which implements the PolicyManager using the "original"
policy implementation.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* use polivyv1 definitions in integration tests
These can be marshalled back into JSON, which the
new format might not be able to.
Also, just dont change it all to JSON strings for now.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* formatter: breaks lines
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* remove compareprefix, use tsaddr version
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* remove getacl test, add back autoapprover
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* use policy manager tag handling
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* rename display helper for user
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* introduce policy v2 package
policy v2 is built from the ground up to be stricter
and follow the same pattern for all types of resolvers.
TODO introduce
aliass
resolver
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* wire up policyv2 in integration testing
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* split policy v2 tests into seperate workflow to work around github limit
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* add policy manager output to /debug
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
* update changelog
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
---------
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This PR switches the homegrown debug endpoint to using tsweb.Debugger, a neat toolkit with batteries included for pprof and friends, and making it easy to add additional debug info:
I've started out by adding a bunch of "introspect" endpoints
image
So users can see the acl, filter, config, derpmap and connected nodes as headscale sees them.
This helps preventing messages being sent with the wrong update type
and payload combination, and it is shorter/neater.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
